#Terminal emulator for mac usb install
#Terminal emulator for mac usb serial
#Terminal emulator for mac usb software
#Terminal emulator for mac usb code
#Terminal emulator for mac usb Pc

For other devices, the name will be different but how the device is displayed and used is exactly same. The picture below shows a 32 Channel USB GPIO Module visible in Windows Device Manager.

#Terminal emulator for mac usb serial

When driver installation is complete, the module should appear in Windows Device Manager as a serial port.

#Terminal emulator for mac usb Pc

Attach USB cable to the PC and when asked by Windows device installation wizard, point to the folder where driver files are present.

#Terminal emulator for mac usb install

To install the driver, unzip the contents of the downloaded driver package to a folder. The driver package for Numato LabвЂ™s products can be downloaded from the product page at ttp://. The table belowВ summarizes the GPIO and Analog to Digital Converter input positions on the screw terminals. The internal Analog to DigitalВ converter supports 10 bits resolution which is adequate for most applications. It is recommended to useВ a series resistor to protect the input from stray voltages and spikes. In contrast toВ GPIOs, Analog inputs can read voltages at any level between 0 to 3.3V volts. A 470 OhmsВ series resistor is recommended for current limiting when connecting LED to a GPIO. So no additional circuitry is needed to drive regular LEDs. Please refer to the Technical Specifications at the end of this document for more details). In output mode,В GPIOs can source up to 25mA (IO source/sink capacity varies depending on IO. It is recommended to use a seriesВ resistor with the GPIO/ADC pins when interfacing with other circuits. The ADC can acquire analogВ signal at the resolution of 10 bits per sample. All IO pins supportВ 3.3V TTL signals and the ADC input range is 0 to +3.3V. Some ofВ these pins can be used as Analog to Digital Converter inputs as well. The module has 32В General Purpose IO pins that can be used for various custom applications.

#Terminal emulator for mac usb code

Also we have a large set of sample code to help you with)ДЄll aspects of the above steps are covered in the following sections including step by step demonstration.

Optionally write a script or application to automate your task (More info on custom programming/scripting is available in this document.

Enter commands (Very similar to entering commands at DOS prompt or Bash prompt).

#Terminal emulator for mac usb software

Open the COM port corresponding to the device using a Serial Terminal software.Driver available for download on the product page.) Install driver (Only needed for Windows.Connect the device to a USB port on the host system.Using this product involves the following simple steps. But in no way limited to this software though.

This document has more information about using this device with the following Serial terminal software. Using this productВ is very easy, thanks to theВ human readable and easy to use command set and the USB CDC interface that allows the device to be used with mostВ readily available serial terminal software such as Tera Term or HyperTerminal. When connected to PC, the module will appear as a serial port inВ Windows Device Manager (or a serial tty device in Linux and Mac). The analog inputs (multiplexed withВ GPIOs) can be accessed over USB interface for extended functionality. This module has 32 on board General purpose I/Os multiplexed with 7 Analog Inputs, each connectedВ to individual screw terminals.

Visual Basic for Applications (Microsoft Office VBA)ДЄ complete list of sample code is available here.

Visual Basic (VB6, VB2008, VB2010 express and other editions).

OrВ any other operating system that supports USB CDC devices.ДЄnd these are some of the languages that can be used for programming:.

Windows XP and later versions (Windows 7, 8/8.1, 10 and future versions).

This product is compatible with the following operating systems: Some of the possible uses of this module includes:

Can be controlled by using standard serial console applications or custom applications.

Can be powered from USB or external power supply.

All IOs available on easy to access screw terminals.

As easy as using a serial port, no USB knowledge required

7 analog inputs with 10-bit resolution (multiplexed with digital IOs).

For power users, this module can be controlled byВ writing programs in various programming languages. This simplicity allows use of off-the-shelf Terminal Emulation programs such as Hyper Terminal and PUTTY for controlling the moduleВ with a simple set of human readable commands. Built in USB to serial conversionВ allows the module to be used without any USB specific knowledge. Ease of use and wider operating systemВ compatibility are the primary goals behind this productвЂ™s design. Numato LabвЂ™s 32 Channel USB GPIO Module is a versatile product for controlling electrical andВ electronic devices remotely from a PC over USB link.